Add Warmth to Your Home With a Fireplace Wall Mount
Add ambiance and warmth to your home, office or commercial space by installing a fireplace wall mount. They are usually simple to install and include mounting brackets to hang or recessing into a wall.
For a simple and quick installation, follow the instructions on the manufacturer's site. Verify that the wall-mounting bracket and the bottom of the fireplace fit together, then fix it to the wall.
Size
A wall mounted electric fireplace can be a focal point within a room that creates warmth and ambience. These units come in a range of sizes that will fit all spaces. A smaller unit is ideal for bedrooms, whereas larger models can be put in a living area or family room. Some models offer an option to install them on the wall in a way that they are flush to give an elegant look.
The height of the fireplace wall mount can influence the way it appears within a room. Many people place them higher on the wall to create a dramatic effect. They typically sit 6 to 12 inches higher than the floor. Some people prefer to mount the TVs at a standard height of 4.5-5 feet. This allows them to be seen by the majority of people sitting in the room.
No matter what size you choose, there are some important aspects to take into consideration to ensure that your fireplace is safe and efficient. For instance, you must make sure that all combustible things are kept at least three feet away from the fire including furniture and drapes. Moreover, you should make sure that the brackets for mounting are secured to the studs if possible. If you cannot find studs, you must use anchors made of plastic to ensure that your fireplace isn't pulled loose.
When selecting a fireplace mount, it's crucial to think about the amount of heat it creates. A best practice is to select a fireplace that produces roughly the same amount of heat as an average household electric heater. If you follow this advice you can be certain that your new fireplace will provide enough additional heating for your entire room.
Some fireplaces have distinct features that distinguish them from other fireplaces. Some fireplaces come with remote control operation with adjustable settings for brightness, as well as no-heat mode. They also come with cool-to-touch glass and realistic-looking LED flames. Other notable features include a convenient built-in shelf to store electronics and an easy installation procedure that doesn't require professional assistance.
Installation
A fireplace wall mount, in contrast to an electrical fire that has to be wired directly into the electrical system of your home It is semi-permanent. It can be erected straight onto a wall or put into the bracket which is fixed to the wall. It is essential to select the location close enough to an electrical outlet for the power cord to reach, while also providing sufficient clearance to nearby objects in line with the recommendations of the manufacturer in your owner's manual.
Before you begin the installation process, be sure that your fireplace is operating in good condition by plugging it into and playing with its LED lights and heating settings. This will inform you whether the fireplace is ready for installation or if further testing is required.
Next, prepare the area where you intend to install your fireplace wall mount. Depending on the model you purchase, this might involve mounting a bump out onto the wall or covering the existing wall with drywall. In the latter case ensure that you employ proper drywall techniques such as mudding and taping, and allow it to dry completely before continuing.
Once the walls are prepped and the bracket is secured to the wall using screws. The best way to do this is to have them placed into the studs that are behind the drywall. This will prevent the fireplace from falling loose from the wall in the future.
After the bracket has been secured, it's now time to put the fireplace in place. The way to mount the fireplace varies between models, but typically there is a ledge on which the fireplace will sit and spots to attach it to the brackets on top. You can then put any other media, such as logs, embers or stones within the fireplace.
Alternatively, some models allow you to connect the screen and firebox together on a wall bracket. This can make the installation even easier however it is essential to ensure that everything fits properly and is secure prior to closing.
Once the fireplace has been installed, you can finish the look by either fixing the bracket to the wall and trimming the wires. You can also consider using paintable wire covers to camouflage the power cord if desired.
Safety
A fireplace wall mount is an ideal method of heating your home without occupying valuable floor space. It is nevertheless important to be cautious when using this kind of fireplace. The first step is to ensure that the fireplace is grounded, which will help prevent electric shock. It is also important to follow the manufacturer's instructions for proper use.
It is possible to buy wall-mounted electric fireplaces that do not generate heat, but most of them have an electric heater to increase the realistic nature of the flame effects. It's usually a fan-forced heating element that blows air over the heating element. Some models also include an infrared source of heat.
After the fireplace has been installed It is essential to be careful not to contact the hot surface since this could cause burns and damage the appliance. Additionally, you should keep combustible materials at least three feet from the fireplace to minimize the chance of fire. Also, be sure not to block the vents at the side of the fireplace.
There are other safety features to be a lookout for when choosing an electric fireplace wall mount. For instance, you should make sure that the unit has an emergency shut-off switch to prevent overheating and fires. It's also a smart idea to choose a unit that has a low output of heat as it will help you save energy.
Another crucial aspect to consider is the material the surround is made from. Choose a material that is safe for pets and children such as wood veneers, steel, or glass. You should also choose one that has a display or remote control to make it easier to operate.
There are many kinds of wall-mounted fireplaces. These include electric and ethanol. The ideal fireplace for you is determined by your budget and the home's design. You can be sure to bring warmth and class to your home, regardless of whether you opt for an ethanol or electric fireplace. Be sure to follow the safety instructions provided by the manufacturer and keep your pets and family secure when using this fireplace.
Style
The style of the fireplace wall mount determines the appearance it will have on your home's walls. Certain models are designed to stand out, while others blend into the decor of your room. For example, a modern model like the Streamlined wall-mount electric fireplace comes with the sleek front glass design and a sleek profile. It features top venting that lets heated air flow freely while keeping the stylish design of the fireplace. Its flat mount and simple-to-use remote make it a breeze to operate.
You can also find electric fireplaces for wall installation with mantels that are more traditional. These units are perfect for homes with an open hearth, or who wish to transform their fireplace that burns wood into an electric fireplace without a chimney. These flat-wall fire places come in a variety of sizes and come with an area to display your decorations. They're an excellent choice for bedrooms, living spaces, and even for home offices.
Gas wall-mount fireplaces are another ideal option for those who want to create a warm, warm and inviting ambience in their homes. These fireplaces come with traditional log sets and are available in several different frame finishes such as black and natural stone. These units also have a customizable LED flame color as well as an ember bed for a personalized touch. Some models come with an integrated TV mount that can be used for additional functionality.
Certain models are designed to be mounted directly on the wall, while others can be recessed partially or completely into a wall. The Allusion wall-mount fireplace has a tiny footprint that allows it to be recessing into frame walls of 2x6. You can, however, put a trim skirt on the exposed area. The Allusion has a convenient remote and a variety of heat settings so you can enjoy the fireplace throughout the year.
Surface-mounted electric fireplaces typically project 4" to 6.5" into the room, so they're simpler to install than models that are recessed into the wall or built out of an existing wall cavity. They're also a great choice for renters who don't want to have to deal with the hassle of drilling holes into their walls. You can simply take out or move the fireplace whenever you move.